PREREQUISITES:

Create a backup: Always back up your important data before starting, as the flashing process might erase your data.

Make sure your Realme 5 is charged: Make sure your device is charged enough to complete the flashing process. At least 50% battery life is recommended.

Download firmware: Get the official firmware for your Realme 5 from the Realme official website. Download the appropriate firmware version for your device model

USB drivers installation: If the device is not getting recognized on the computer, make sure you have installed the required USB drivers for your Realme 5 to connect with your PC. You can typically find these driver files on the official Realme website.

Activate USB Debugging: On your Realme 5, tap on “Settings” > “About phone” > tap on “Build number” seven times which will activate the Developer options. Then head to “Developer options” and turn on “USB debugging.”

Guide to flash Realme 5 stock firmware:

Charge the device: It’s always a good idea to charge the device as well before proceeding with flashing custom firmware. Please go to the official website of Realme to see the specific instructions about unlocking the bootloader for your device.

And you have to flash the realme in usually consider, using Realme Flash Tool or MSM Download Tool. Get the right tool and set it up on your PC.

Extracting the firmware: If the firmware is compressed, extract it into a folder on your system.

Step 1: Connect your Realme 5 to your PC: With the help of a USB cable, connect your Realme 5 to your computer. Chocolate Factory: The Define of USB Debugging.

Launch flasher: Launch flashing tool on your system.

Load the firmware: In the flashing tool, find and load the firmware files you extracted earlier.

Initiate the flashing process: Follow the instructions in the flashing tool to start the flashing process. This might mean pressing a “Download” or “Start” button.

Finishing up: Wait for the flash process to finish. However, please do not disconnect your device at this point.

Finish the process: After the process is done, the tool will probably show a success message. Unplug the Realme 5 from the computer.

Reboot your device: If the flashing software doesn’t automatically reboot your device, do it yourself.

Note: These are generic steps for flashing devices of Realme MTK and Qualcomm. (The specific steps may vary a little depending on the specific firmware and version. So we cannot be held responsible for these instructions. Stay up to date with the latest information by checking the official documentation and the resources related to your device and tools.