How to install ?

  1. Before you proceed, make sure to back up all your important data as the flashing process may result in data loss.
  2. Ensure your Huawei Y5P has sufficient battery life or connect it to a charger during the process to avoid interruptions.
Steps to Flash Huawei Y5P Firmware:
  1. Download Necessary Files:

    • Obtain the official firmware for your Huawei Y5P from the Huawei website or a trusted source.
    • Download and install Huawei HiSuite on your computer.
  2. Enable USB Debugging:

    • On your Huawei Y5P, go to “Settings.”
    • Scroll down and tap on “About phone.”
    • Find and tap on “Build number” seven times to enable Developer Options.
    • Go back to the main settings screen, enter “Developer options,” and enable “USB debugging.”
  3. Install Huawei USB Drivers:

    • Install the necessary USB drivers for your Huawei device on your computer. You can find these drivers on the official Huawei website.
  4. Unlock the Bootloader (Optional):

    • Some devices may require unlocking the bootloader before flashing custom firmware. Check if your device needs this step and follow the official instructions provided by Huawei.
  5. Extract Firmware Package:

    • Extract the firmware package you downloaded. You should get a folder containing various files.
  6. Connect Your Phone to the Computer:

    • Connect your Huawei Y5P to your computer using a USB cable.
  7. Open Huawei HiSuite:

    • Launch Huawei HiSuite on your computer. It should recognize your connected device.
  8. Start the Update Process:

    • Follow the on-screen instructions in HiSuite to start the update process. This may involve selecting the firmware file you downloaded earlier.
  9. Wait for the Process to Complete:

    • The firmware flashing process may take some time. Ensure that your device stays connected to the computer and avoid disconnecting it until the process is complete.
  10. Finish and Reboot:
  • Once the flashing process is complete, your Huawei Y5P should automatically reboot with the new firmware installed.

Remember that these instructions are based on general steps for flashing Huawei devices. The exact steps might vary slightly based on the specific firmware and version you’re using. So we can’t take responsibility for these instructions. Always refer to the official documentation and resources for your device and tools.

Huawei Y5P 2018 (DRA-LX2)

Brand: Huawei
Model: DRA-LX2

OS Version: Android 8.1, EMUI 8
Size: 1.52GB

Language: English


Display: LCD (5.45 Inch)

Resolution: 720 x 1440 pixels

Dimensions: 146.5 x 70.9 x 8.3 mm

Weight: 142g

Chipset: Mediatek MT6739 (28 nm)

CPU: Quad Core

GPU: PowerVR GE8100

Camera: 13MP (Main) 5MP (Selfie)


Scroll to Top