How to install ?

PREREQUISITES:
  1. Backup your data: Before you start, make sure to back up your important data, as the flashing process may wipe your device.

  2. Charge your device: Ensure that your Realme 5 has enough battery to complete the flashing process. It’s recommended to have at least 50% battery.

  3. Download firmware: Obtain the official firmware for your Realme 5 from the official Realme website. Make sure to download the correct firmware version for your device model.

  4. Install USB drivers: Install the necessary USB drivers on your computer to establish a connection between your Realme 5 and your PC. You can usually find these drivers on the official Realme website.

  5. Enable USB debugging: On your Realme 5, go to “Settings” > “About phone” > tap on “Build number” seven times to enable Developer options. Then, go to “Developer options” and enable “USB debugging.”

Steps to Flash Realme 5 Firmware:

 

  1. Unlock the bootloader (if required): Some devices require unlocking the bootloader before flashing custom firmware. Check Realme’s official website for specific instructions on how to unlock the bootloader for your device.

  2. Download and install flashing tools: Realme devices typically use tools like SP Flash Tool or MSM Download Tool for flashing. Download the appropriate tool and install it on your computer.

  3. Extract firmware: If the firmware is in a compressed format, extract it to a folder on your computer.

  4. Connect your Realme 5 to your PC: Use a USB cable to connect your Realme 5 to your computer. Ensure that USB debugging is enabled.

  5. Open the flashing tool: Open the flashing tool on your computer.

  6. Load firmware: In the flashing tool, locate and load the firmware files you extracted earlier.

  7. Start the flashing process: Follow the on-screen instructions in the flashing tool to start the firmware flashing process. This may involve clicking on a “Download” or “Start” button.

  8. Wait for completion: Once the flashing process begins, wait for it to complete. Do not disconnect your device during this time.

  9. Complete the process: Once the process is complete, the tool will likely display a success message. Disconnect your Realme 5 from the computer.

  10. Reboot your device: If the flashing tool doesn’t automatically reboot your device, do it manually.

  •  

Remember that these instructions are based on general steps for flashing Realme MTK and Qualcomm devices. The exact steps might vary slightly based on the specific firmware and version you’re using. So we can’t take responsibility for these instructions. Always refer to the official documentation and resources for your device and tools.

Realme 5 (RMX1911,RMX1919)

Brand: Realme 5
Model: RMX1911, RMX1919
Region: Global
Version: RMX1911EX_11_C.79
Size: 6GB
Type: EDL Mode
Release Date: 25/1/2022

Network: GSM/HSPA/LTE

Display: IPS LCD (6.5 Inch)

Resolution: 720 x 1600 pixels

Dimensions: 164.4 x 75.6 x 9.3 mm

Weight: 198g

Chipset: Qualcomm SDM665 Snapdragon 665 (11 nm)

CPU: Octa Core

GPU: Adreno 610

Camera: 12MP (Main) 13MP (Selfie)

Download

Scroll to Top