PREREQUISITES:

1. Backup Your Data: Before proceeding, ensure that you have backed up all important data on your device. Flashing firmware can result in data loss.

2. Charge Your Device: Make sure your Vivo X50 has sufficient battery life to avoid any interruptions during the flashing process.

3. Download Necessary Files: Obtain the official firmware file for your Vivo X50 from the official Vivo website or trusted sources.

   Download and install the necessary flashing tools. Vivo devices often use the “SP Flash Tool” or “QFIL” (Qualcomm Flash Image Loader).

Steps to Flash Vivo X50 Firmware:

1. Install USB Drivers:

   • Install the appropriate USB drivers for your Vivo X50 on your computer.

2. Extract Firmware Files:

   • Extract the firmware file you downloaded. This may result in a folder containing files necessary for flashing.

3. Download and Install Flashing Tool:

   • Download and install the flashing tool (SP Flash Tool or QFIL) on your computer.

4. Boot into Download/Flash Mode:

   • Turn off your Vivo X50.
   • Press and hold the specified key combination to enter Download or Flash mode. This combination can vary, so refer to your device’s manual or online resources.

5. Connect Your Device:

   • Connect your Vivo X50 to the computer using a USB cable.

6. Load Firmware into Flash Tool:

   • Open the flashing tool on your computer.
   • Load the firmware files into the flashing tool. The exact steps depend on the tool you’re using.

7. Start the Flashing Process:

   • Once everything is set up, initiate the flashing process. This may involve clicking a “Download” or “Start” button in the flashing tool.

8. Wait for Completion:

   • Allow the flashing process to complete. This may take some time.

9. Disconnect and Reboot:

   • Once the process is complete, disconnect your Vivo X50 from the computer.
   • Power on your device and check for any improvements or changes.

Important Notes:

• Always use official and trusted firmware files and tools to avoid potential issues.
• Ensure that your device is compatible with the firmware version you are flashing.
• This process may void your warranty, so proceed with caution.

Remember that these instructions are based on general steps for flashing Vivo devices. The exact steps might vary slightly based on the specific firmware and version you’re using. So we can’t take responsibility for these instructions. Always refer to the official documentation and resources for your device and tools.