We are providing you with a .rar file to reduce the file size. Please note that you need to convert this file to a .zip format.

Before You Begin:

Vivo Y19 Bootmode / Diagram–Firmware Flashing Preparation

The Firmware Flashing process involves certain openings in Vivo Y19 (Create with Version Hexa), and if not performed accurately, can lead to loss of information (and therefore the content stored) or damage your Vivo Y19 ( Create with Version Hexa). Make sure to follow the precautions to flash it successfully and safely.

Essential Preparations

• Backup Your Data: Flashing firmware erases all data on your device, so make sure to backup important files, contacts, messages, and media in cloud storage or external devices.
• Charge your Device: A charged (100%) Vivo Y19 with a power source connected is essential to avoid interruption in flashing.
• Here is a list of all Android tools with a one-line explanation of what they each do: Step 1: Download Official Firmware
• Go to the Vivo authority site or any solid source to download the correct firmware for your Vivo Y19 model. Ensure that you are using the correct version, as incompatible versions will likely lead to boot loops or software errors.

Step-by-Step Flashing Process

Set Up USB Drivers

• Make sure you have installed USB drivers for Vivo Y19 on your computer. These are drivers for PC-to-device communication. The official USB drivers can be found on Vivo’s support page.

The Flash Utility:

• Download and Install
• Flashing Vivo Devices: Vivo devices usually need a vendor-specific flashing tool. Vivo Flash Tool is generally used for flashing Vivo mobile devices, Download Vivo Flash Tool As a tool that can be updated regularly, make sure you are working on the current version of the tool to avoid any compatibility problems.

Extract the Firmware File

• Download the firmware file and unzip it with WinRAR or 7-Zip. The folder that you extracted contains important files like the scatter file that the Flash Tool needs.

Launch the Flash Tool

• Then start the Vivo Flash Tool on your PC, it should work like a charm.

Load the Firmware File

• You’ll need to load or select the firmware.bin file in the tool.
• Then open the extracted firmware folder and click on the appropriate file.
• Now let the tool scan the firmware files.

Turn Off Your Device

• Switch off your Vivo Y19 completely.
• Connect Your Device to Computer
• Connect your Vivo Y19 to the computer via a high-quality USB cable.
• Keep the device powered off during the connection.

Answer: In the case of firmware updates you enter the necessary flashing mode by pressing and holding certain hardware buttons (Power + Volume Down, for example).

Flash Tool should show the connected device if the proper USB drivers have been installed.

Start the Flashing Process

• Once detected by the tool, select “Flash” to start the process.
• Now the tool will start copying the firmware files onto your Vivo Y19.
• Do not disconnect the USB cable or shut down the PC to interrupt this process.

1. Wait for the Flashing to Complete
2. Flashing can take a few minutes. Just wait using the Flash Tool progress bar. If successful, you should see a confirmation message from the tool verifying the flashing operation.
3. Unplug the Vivo Y19 from your computer.

Power on your device.

• The initial boot post flashing may take longer than expected — let it finish the setup.

Important Notes

• Installing unofficial firmware is a great way to experience serious problems including but not limited to bricking your device — so stick to official and trusted firmware only.
• Ensure firmware compatibility Incorrectly flashing firmware can lead to permanent software corruption. Make sure you are downloading firmware files for the same device model.
• Voiding Warranty: It may void the warranty of your device. If you do not know how, contact Vivo support for directions.
• Backup Before You Go: As flashing will erase all the data on the device, kindly take a backup of your stuff before you go down that road.
• Do Not Interrupt the Process: Flashing is a process in which, if interrupted, the software will be corrupted and the device will not boot.

Final Thoughts

The following tutorial is a step-by-step guide on how to format firmware Vivo Y19 using Vivo Flash Tool (also known as Vivo Y19 Flash Tool) to flash a format ROM based on Android. However, the precise steps may differ, as different tools and firmware versions are used. Make sure you will always refer to official guides and resources for your model. In case of difficulty, you may contact Vivo customer support or an authorized service center for assistance.